SR006-InfoxDome-ONE-FPV GNSS Anti-Jamming Positioning Module
- Supported GNSS systems: BeiDou, GPS, GLONASS and Galileo
- Positioning accuracy: ≤1 m (1σ, PDOP≤4, no interference); ≤10 m (under interference)
- Anti-jamming capability: 65 dBc
Product Overview
The SR006-InfoxDome-ONE-FPV GNSS Anti-Jamming Positioning Module is part of the Video & Data Links range. Potential applications include: UAV, USV and UGV command links. Key specifications: Supported GNSS systems: BeiDou, GPS, GLONASS and Galileo; Positioning accuracy: ≤1 m (1σ, PDOP≤4, no interference); ≤10 m (under interference); Anti-jamming capability: 65 dBc. Aerosys Technology supplies it EXW from Hong Kong; MOQ 1 PC.
SR006-InfoxDome-ONE-FPV is a compact GNSS anti-jamming positioning module with an integrated QMC5883P geomagnetic sensor. It supports four satellite systems, reports up to 1 m single-point accuracy without interference, and provides a UART TTL interface.
Video and data link systems on 1.4 GHz with real-time spectrum sensing and frequency hopping, built for UAV, USV, UGV, robot-dog, maritime and mountain-relay networks.
Key Features
- Supported GNSS systems:BeiDou, GPS, GLONASS and Galileo
- Positioning accuracy:≤1 m (1σ, PDOP≤4, no interference); ≤10 m (under interference)
- Anti-jamming capability:65 dBc
- Cold-start time:≤40 s
- Hot-start time:≤5 s
- Re-acquisition time:≤2 s
Configuration and application fit
Published selection points
- Published specification: Supported GNSS systems: BeiDou, GPS, GLONASS and Galileo
- Published specification: Positioning accuracy: ≤1 m (1σ, PDOP≤4, no interference); ≤10 m (under interference)
- Published specification: Anti-jamming capability: 65 dBc
- Published specification: Cold-start time: ≤40 s
- Published specification: Hot-start time: ≤5 s
- Published specification: Re-acquisition time: ≤2 s
For a configuration quote, send the model, quantity, destination and intended civil or commercial use. Add the required interface, payload, cargo or sensor details where relevant so the supply scope can be checked clearly.
Technical Specifications
| Parameter | Value |
|---|---|
| Supported GNSS systems | BeiDou, GPS, GLONASS and Galileo |
| Positioning accuracy | ≤1 m (1σ, PDOP≤4, no interference); ≤10 m (under interference) |
| Anti-jamming capability | 65 dBc |
| Cold-start time | ≤40 s |
| Hot-start time | ≤5 s |
| Re-acquisition time | ≤2 s |
| Dynamic limits | Velocity ≤500 m/s; acceleration ≤4 g |
| Timing accuracy | ≤20 ns RMS |
| Built-in sensor | QMC5883P geomagnetic sensor, I²C |
| Interface | 1 × UART TTL |
| Power consumption | ≤200 mA at 5 V |
| Dimensions | 47 × 38 × 15 mm (±0.5 mm) |
| Weight | 32 g (±1 g) |
| Operating temperature | −40 to +65 °C |
Application Scenarios
- UAV, USV and UGV command links
- Video downlink for inspection crews
- Maritime and mountain relay
- Firefighting and security communications
- Robot-dog and mobile platform telemetry
Related applications
Related Products
AT-S65-4CH-SNB Compact Four-Element GNSS Anti-Jamming Terminal
AT-S65-4CH-SNB is a compact four-element GNSS anti-jamming terminal for small UAVs. The 65 mm form factor supports BeiDou B1I, GPS
AT-009Pro-8CH-BD-WG-DT Four-Element B3 GNSS Anti-Jamming Terminal
AT-009Pro-8CH-BD-WG-DT is a four-element GNSS anti-jamming terminal for UAV and unmanned-vehicle navigation. It receives BeiDou B1
AT-009Pro-8CH-G1-WG-DT Four-System GNSS Anti-Jamming Terminal
AT-009Pro-8CH-G1-WG-DT is a four-element GNSS anti-jamming terminal for UAV and unmanned-vehicle navigation. It supports BeiDou, G
Commonly Integrated With
G12
20 km remote controller with a 5.5-inch HD screen and a 10,000 mAh battery. Runs Android 13 on a Qualcomm platform with hardware H
AT-100D Three-Axis Dual-Light Gimbal
The AT-100D is a three-axis gyro-stabilized dual-light gimbal with a compact and lightweight industrial design, equipped with a 10
AT-G02 Electric VTOL Fixed-Wing UAV
Compact electric VTOL fixed-wing UAV built for cost-effective large-scale deployment. Weighing just 14 kg maximum take-off with a
VB-2 Throwable Detection Ball
Throwable spherical reconnaissance device for covert indoor and outdoor detection. It streams 100 m daytime / 18 m infrared imager
Frequently Asked Questions
What is the difference between the AT-T, AT-M and AT-S link series?
All three run on 1.4 GHz with real-time spectrum sensing and frequency hopping. The T series is anti-interference point-to-point, up to 300 km at 20 Mbps. The M series adds MESH networking to 128 nodes at 40 Mbps. The S series trades bandwidth for reach: 5 Mbps up to 500 km.
What is the operating frequency band of the AEROLINK links?
All AEROLINK series operate on 1.4 GHz and support custom frequency bands. Transmit power ranges from 0-27 dBm on the compact AT-T27 up to 0-46 dBm (dual 40 W) on the AT-T46, AT-M46 and AT-S46, which dissipate 172 W at full output.
Do your radio links meet local frequency regulations?
The AEROLINK links run on 1.4 GHz and support custom bands, but the operating frequency, bandwidth and transmit power must comply with local radio regulations and the necessary licences must be obtained by the operator. Licensing, frequency configuration and regional suitability remain subject to contract and technical confirmation.
What does Aerosys Technology supply?
Our catalogue covers 279 product models across 13 categories. Behind that catalogue sits production in the Pearl River Delta and a commercial centre in Hong Kong that handles the contracting, freight, banking and export documentation cross-border trade depends on.
What is the minimum order quantity?
It depends on the product line. Ground control stations are quoted on a 5-unit basis, while video and data links and camera payloads are quoted from a single unit. Complete platforms such as VTOL aircraft, multi-rotors and unmanned ground vehicles are quoted per set. Where a product page states a different MOQ, that page governs.
How do I get a quotation, and how long is it valid?
Send us the model numbers and quantities you need by email. Quotations are issued in USD and are valid for 14 days from the date of issue unless a different period is stated. An order is confirmed only when we issue a written order confirmation and receive the agreed payment; a quotation or an email alone is not an accepted order.
Request a Quotation
Send the model and quantity — we reply with pricing, lead time and the specification sheet.
Send inquiry